Do you have questions about how to use the RanLOS solutions in the best way? No worries, we’ve got you covered. Below you can find frequently asked questions about our measurement system, setup, frequency range, instruments and other important topics related to measuring.
Do you have any other question or is in need of personal support? Fill in the form at the bottom of this page and we’ll reach out to you!
RanLOS large test system is optimized for full vehicle measurements. The smaller test system is ideal for smaller base stations or devices.
With RanLOS solutions you can do both passive and active measurements. Passive measurements such as radiation pattern and gain measurements of antennas. Active measurements such as data throughput up to 2×2 MIMO.
The measurement system consists of a cylindrical reflector with a linear feed array. The feed array consists of dual-polarized antennas. The feed array illuminates the reflector which will create a plane wave in the test zone. This means that we can perform measurements in far-field conditions, even though we are at a short distance from the reflector.
By connecting an instrument, either a network analyzer or communication tester, you can perform either passive or active measurements. The device under test is placed on a turntable in front of the reflector antenna. The instrument and turntable are both easily controlled through
the RanLOS software.
You can perform a measurement in 5 easy steps. Read more and download details about our software on our software and service page here.
With RanLOS solution you can currently measure antennas in the frequency range 0.7 GHz to 6 GHz as well as 27-29 GHz.
We are currently developing 6-12 GHz.
We do not have a solution for 55 GHz and 77 GHz yet. However, we are looking into this. Feel free to contact us to talk and discuss other frequencies than the ones we currently provide (0.7 – 6 GHz and 27-29 GHz).
Yes, it has been validated .
RanLOS has participated in the government founded project Innovation and Simluation of Wireless Technologies toghether with RISE, Volvo Cars, Volvo AB and Lund University.
RanLOS Sub-6 GHz was validated during this project. For RanLOS the three-and-a-half-year long project has been a great success, and has resulted in that we now can offer commercial wireless communication tests for full-scale vehicles. The project has also resulted in two journal papers and three conference papers, covering the RanLOS measurement system.
Yes, we provide a turnkey solutions.
By connecting an instrument, either a network analyzer or communication tester, you can perform either passive or active measurements. The device under test is placed on a turntable in front of the reflector antenna. The instrument and turntable are both easily controlled through the RanLOS software.
The RanLOS software is module-based and supports a range of different instruments and positioners. See full list in our product sheet which you can find here: RanLOS Software and Services
Yes, we sell turntables and positioners for smaller devices. For larger devices, such as vehicles, our software supports already existing turntables and positioners.
Yes, we provide calibration antennas.
Fill in the form below and we will get back to you within 24h (during working days) to answer your questions and solve your problems. We’re here to help you succeed!