MEASUREMENT
SYSTEMS
Sub-6 GHz TEST SYSTEM
The RanLOS Sub-6 GHz test system is the ideal equipment for measuring larger devices – both active and passive.
The RanLOS Sub-6 GHz test system consists of a cylindrical reflector fed by a dual polarized passive linear antenna array. The system has the outer dimensions 2.1 m x 3.3 m x 4.3 m and is intended for testing of larger devices, such as vehicles.
The system provides two operational modes: Passive for antenna radiation pattern measurements and active for communication performance testing, e.g., throughput.
Together with the RanLOS software, the system is compatible with a large number of instruments, turn tables and other test equipment.
mmWave TEST SYSTEM
The RanLOS mmWave Test System is the ideal equipment for measuring smaller devices at mmWave frequencies - both active and passive
The RanLOS mmWave test system consists of a cylindrical reflector fed by a dual polarized passive linear antenna array. The mm-Wave test set-up has the outer dimensions 0.4 m x 0.6 m x 0.8 m, and is designed to be installed in small chambers. The system is intended to be used for smaller wireless devices and antennas.
RanLOS 3D-POSITIONER FOR HANDHELD UNITS
The RanLOS 3D positioner for handheld units is designed to be used together with the mmWave test system.
The RanLOS 3D positioner can be used for handheld units, such as mobile phones, but also for smaller antennas. The 3D positioner is controlled by the RanLOS measurement software, and provides movement for measuring high resolution 3D antenna pattern.
RanLOS mission is to provide cost efficient, accurate and repeatable test technologies and systems for characterizing wireless devices. Our customers benefit from a reliable, accessible and time saving test solution, enabling lower costs and a faster time to market.
Address:
Stora Åvägen 21,
SE 436 34 Askim
Phone:
+ 46 703 19 65 30
Email:
info@ranlos.com
Powered by Merphi.
